The Sunday Park Ranger Frame was made with the BMX park rider in mind. Since most of the Sunday Bikes Frame line up is designed more for street they realized there was a good amount of park riders that would like the quality that Sunday offers. Shorter rear end, steeper head tube and all the sweet bells and whistles Sunday Bikes frames are known for the Park Ranger could be the frame for you.

• 100% 4130 Chromoly Frame
• Park and transition inspired geometry.
• Nightshift style, double-butted, top and down tubes with proven internal gusseting.
• Integrated seat clamp
• Butted Seat Tube & Miter Cut Top Tube:
  A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a sandwiched top tube at this critical junction.
• Tapered Chain & Seat Stays:
  Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings.
• Hollow Dropouts with Chain Tensioners:
  Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal.
• Removable Brake Hardware:
  Proven, removable, brake mounts and cable guides/stops work flawlessly when installed and allow for a sleek overall look when theyre not.

Top Tube Lengths: 20.5″, 20.75″, or 21″
Head Tube Angle: 75.25
Seat Tube Angle: 71
Chainstay Length: 12.70-13
Bottom Bracket Height: 11.625
Standover: 7.625
Tire Clearance: 2.4
Head Tube Length: 4.8
Weight: 5lbs