The E-flite 4-Site 3D FF is a biplane alternative to the extremely popular Eratix 3D FF that offers the aggressive aerobatic plus smooth sport and slow-flying performance of similar class models – without all the hassles of buying components for and building one because it bolts and snaps together in no time! Key Features The easiest to buy, assemble and fly biplane flat foamy model yet – capable of slow cruising, sport flying, basic and all-out 3D aerobatics Specially tuned brushless motor that’s factory-installed and ready for use with popular 3S 850-1000mAh batteries 30-amp Spektrum Avian Smart ESC provides real-time battery voltage, current, RPM and other data via compatible receivers and transmitters Spektrum AR630+ receiver with fly-by range telemetry and industry-leading DSMX technology Easier to fly with innovative and optional-use SAFE Select flight envelope protection (BNF Basic version only) In The Box (1) E-flite 4-Site 3D FF 860mm with: (1) Spektrum Avian Brushless Outrunner Motor (installed) (1) Spektrum Avian 30-Amp Smart Lite Brushless ESC (installed) (3) Spektrum Sub-Micro Digital, Metal-Geared Servos (installed) (1) Spektrum AR630+ Receiver with AS3X+ and SAFE Select (installed) (BNF Basic version only) (1) Product Manual Needed to Complete Full-range 4-5+ channel Spektrum DSMX/DSM2 compatible transmitter 3S 11.1V 850-1000mAh LiPo with IC2 Connector Compatible LiPo charger E-flite 4-Site 3D FF RC Airplane Introduction In the early 2000s, “flat foamy” models were extremely popular because they could be scratch-built from foam sheets you could buy in many stores. Today, most foam models are fully moulded sport and scale aircraft and few can match the unique capabilities and performance of flat foam models, especially those designed and built for aerobatic plus 3D flying! The E-flite 4-Site 3D FF (Flat Foamy) 800mm is based on the original F3P and UMX models and is a biplane alternative to the popular Eratix 3D FF that’s taken the market by storm. It’s perfect for experienced pilots who already build and fly flat foam models, intermediate pilots who are interested in them but don’t want to undertake a complicated build, and less experienced pilots who have always wanted to try but were intimidated by the extra effort and skills required to buy, build and fly such a model. The 4-Site 3D FF is the easiest to fly, most convenient, and best value in a biplane flat foamy model yet! E-flite 4-Site 3D FF RC Airplane Overview The E-flite 4-Site 3D FF (Flat Foamy) 800mm offers the aggressive aerobatic plus smooth sport and slow-flying performance of similar class models without all the hassles of buying components for and building one! It bolts and snaps together so it can be ready to fly in less time than it takes to charge a battery compared to the glue, tape, and many hours it usually takes to assemble other “flat foamy” aircraft. It’s a biplane alternative to the best-selling Eratix 3D FF with a shorter wingspan but more wing area for lower wing loading overall. Its lightweight yet extremely durable EPP airframe is mostly factory-assembled and includes three durable and precise metal-geared servos on all the control surfaces. The factory-installed power system features a 3S-compatible brushless motor matched to a Spektrum Avian Smart ESC compatible with Smart and non-Smart 8501000mAh batteries. The BNF Basic version is also equipped with an AR630+ receiver to deliver real-time telemetry data, enhanced AS3X+, and optional-use SAFE Select technologies. It’s small enough and light enough to be flown indoors in gymnasiums and other similar spaces or outdoors in yards, parks, and sports fields, making it a versatile addition to the hangar for a wide range of pilots! E-flite 4-Site 3D FF RC Airplane Features Receiver loaded with a Smart Transmitter File that allows you to import all settings for NX and iX series transmitters during the binding process The unmatched stability and locked-in feel of exclusive and enhanced AS3X+ technology Compatible with the Spektrum DXS transmitter included with many of the most popular E-flite and HobbyZone trainer airplane models Extremely durable yet lightweight, high-density EPP airframe with carbon fibre and composite reinforcements Factory-finished in a high-contrast, high-visibility trim scheme for excellent orientation Three factory-installed metal geared and digital servos for all control surfaces Fast and easy assembly unlike similar class models no glue or tape required Landing gear snaps into place for easy installation, removal and replacement Skill Level 2 for the E-flite 4-Site 3D FF RC Airplane Skill Level 2 Some Experience Required Skill Level 2 aircraft, like this one, are suitable for RC pilots with the experience and skills to assemble, set up, and fly similar class models. Although the 4-Site 3D FF is easier to assemble and fly than other flat foamy models, it’s not a suitable first-ever RC aircraft for new pilots or a first-ever aerobatic/3D model for low-time RC pilots. You should have the experience and skills necessary to successfully fly aerobatic models like the E-flite UMX Ultrix, UMX Timber X, T-28 Trojan 1.1m, Sportix 1.1m, Timber X 1.2m, or other similar class models before attempting to fly the 4-Site 3D FF BNF Basic version. Bind-N-Fly Completion Level Advantage for the E-flite 4-Site 3D FF RC Airplane Exclusive Technologies This BNF Basic version has exclusive Spektrum AS3X+ and SAFE Select technologies. Enhanced AS3X+ technology works behind the scenes to smooth out the effects of wind and turbulence and deliver an even more locked-in feel than standard AS3X, which makes it seem like you’re flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits and automatic self-leveling that can be turned on and off at the flip of a switch! If you don’t want to enable the SAFE Select features, simply bind the receiver normally, and only AS3X+ will be active. The receiver is also loaded with a Smart Transmitter Model File that allows you to import all the settings for NX and iX series transmitters during the binding process to be ready to fly in less time than ever! Smart Technology for the E-flite 4-Site 3D FF RC Airplane Smart Technology The 4-Site 3D FF is equipped with an exclusive Spektrum Avian Smart Lite ESC that can provide a variety of real-time power system-related telemetry data including motor RPM, current, overall battery voltage, and more with Smart and non-Smart batteries via compatible receivers (including the AR630+) and Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6 to 20, iX12 to 20 and others) while you fly. High Performance for the E-flite 4-Site 3D FF RC Airplane Uniquely Capable Like other flat foamy models, the 4-Site 3D FF is capable of slow cruising, smooth sport flying, basic aerobatics, and even aggressive 3D flying-all in the same flight! It offers a truly “mild to wild” flight experience that intermediate to experienced pilots will appreciate, whether indoors in gymnasiums or outdoors in yards, parks, sports fields, and beyond. High Performance for the E-flite 4-Site 3D FF RC Airplane High Performance The factory-installed brushless power system features a specially tuned Spektrum outrunner motor. This power system delivers plenty of thrust for unlimited vertical and 3D performance with 3S 8501000mAh batteries! Easy Assembly for the E-flite 4-Site 3D FF RC Airplane Easy Assembly Unlike other flat foamy models that are only available as kits without power and control components, the 4-Site 3D FF arrives mostly factory-assembled with the power system, servos, and receiver (BNF Basic version only) installed. All you need to do is finish some quick and easy final bolt/snap-together assembly-without the use of glue, tape, or special tools-and you’ll be ready to fly in less time than it takes to charge a battery! Durable Design for the E-flite 4-Site 3D FF RC Airplane Durable Design Three factory-installed digital servos with metal gears on all the control surfaces, plus construction with carbon fibre and composite-reinforced, high-density EPP, deliver a lightweight yet stiff and durable airframe. In the unfortunate event you damage any airframe parts or components and can’t repair them, a full line of replacement/spare parts is readily available. Spektrum AS3X Plus and SAFE technology Bind-N-Fly Completion Level Advantage Already own a Spektrum transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly! This Bind-N-Fly Basic model is equipped with a Spektrum 2.4GHz DSMX receiver featuring AS3X+ (Artificial Stabilization-3-aXis+) technology that works behind the scenes to smooth out the effects of wind and turbulence. The result is a heightened sense of stability and precision that makes you feel like you’re flying a much larger, expertly tuned aircraft. If this is your first model of its type, or you want an extra margin of safety while familiarizing yourself with the airplane, you can enable the optional-use SAFE Select flight envelope protection technology built into the receiver. No programming is required. Simply change up the binding sequence as directed in the manual. With SAFE Select enabled, you get: Pitch and Bank Angle Limits These envelope limits keep the airplane from rolling or pitching upside down. They also prevent excessive climb or dive angles. Automatic Self-Leveling The airplane instantly returns to and holds level flight when the sticks are released and in the centre position. It’s also helpful for keeping the wings level during takeoffs/launches and landings. Easy Switch Assignment-No Complex Programming Required The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn’t require any complex programming and takes just a few seconds. If you don’t want to enable the SAFE Select features, just bind the receiver normally and it will function like a standard AS3X+ receiver. Spec Data Wingspan: 800mm Battery type 3S 11.1V 850-1000mAh LiPo with IC2 Connector (Not Included) Motor type 2408-1200Kv Outrunner Brushless Motor 4-Pole Weight: 447g Length: The E-flite 4-Site 3D FF is a biplane alternative to the extremely popular Eratix 3D FF that offers the aggressive aerobatic plus smooth sport and slow-flying performance of similar class models – without all the hassles of buying components for and building one because it bolts and snaps together in no time! Key Features The easiest to buy, assemble and fly biplane flat foamy model yet – capable of slow cruising, sport flying, basic and all-out 3D aerobatics Specially tuned brushless motor that’s factory-installed and ready for use with popular 3S 850-1000mAh batteries 30-amp Spektrum Avian Smart ESC provides real-time battery voltage, current, RPM and other data via compatible receivers and transmitters Three factory-installed digital and metal-geared servos for all control surfaces Fast and easy assembly unlike similar class models – no glue or tape required In The Box (1) E-flite 4-Site 3D FF 860mm with: (1) Spektrum Avian Brushless Outrunner Motor (installed) (1) Spektrum Avian 30-Amp Smart Lite Brushless ESC (installed) (3) Spektrum Sub-Micro Digital, Metal-Geared Servos (installed) (1) Product Manual Needed to Complete Full-range 4+ channel transmitter and receiver 3S 11.1V 850-1000mAh LiPo with IC2 Connector Compatible LiPo charger E-flite 4-Site 3D FF RC Airplane Introduction In the early 2000s, “flat foamy” models were extremely popular because they could be scratch-built from foam sheets you could buy in many stores. Today, most foam models are fully moulded sport and scale aircraft and few can match the unique capabilities and performance of flat foam models, especially those designed and built for aerobatic plus 3D flying! The E-flite 4-Site 3D FF (Flat Foamy) 800mm is based on the original F3P and UMX models and is a biplane alternative to the popular Eratix 3D FF that’s taken the market by storm. It’s perfect for experienced pilots who already build and fly flat foam models, intermediate pilots who are interested in them but don’t want to undertake a complicated build, and less experienced pilots who have always wanted to try but were intimidated by the extra effort and skills required to buy, build and fly such a model. The 4-Site 3D FF is the easiest to fly, most convenient, and best value in a biplane flat foamy model yet! E-flite 4-Site 3D FF RC Airplane Overview The E-flite 4-Site 3D FF (Flat Foamy) 800mm offers the aggressive aerobatic plus smooth sport and slow-flying performance of similar class models without all the hassles of buying components for and building one! It bolts and snaps together so it can be ready to fly in less time than it takes to charge a battery compared to the glue, tape, and many hours it usually takes to assemble other “flat foamy” aircraft. It’s a biplane alternative to the best-selling Eratix 3D FF with a shorter wingspan but more wing area for lower wing loading overall. Its lightweight yet extremely durable EPP airframe is mostly factory-assembled and includes three durable and precise metal-geared servos on all the control surfaces. The factory-installed power system features a 3S-compatible brushless motor matched to a Spektrum Avian Smart ESC compatible with Smart and non-Smart 8501000mAh batteries. The BNF Basic version is also equipped with an AR630+ receiver to deliver real-time telemetry data, enhanced AS3X+, and optional-use SAFE Select technologies. It’s small enough and light enough to be flown indoors in gymnasiums and other similar spaces or outdoors in yards, parks, and sports fields, making it a versatile addition to the hangar for a wide range of pilots! E-flite 4-Site 3D FF RC Airplane Features Extremely durable yet lightweight, high-density EPP airframe with carbon fiber and composite reinforcements Factory-finished in a high-contrast, high-visibility trim scheme for excellent orientation Landing gear snaps into place for easy installation, removal and replacement Skill Level 3 Experience Required for the E-flite 4-Site 3D FF RC Airplane Skill Level 3 Experience Required Skill Level 3 aircraft, like this one, are suitable for more experienced RC pilots with the skills to assemble, set up, and fly similar class models. This PNP version requires more experience and skills to assemble and fly than the BNF Basic version because you must install a receiver that does not already include properly tuned AS3X+ and SAFE Select technologies. It’s not a suitable first-ever RC aircraft for new pilots or first-ever aerobatic/3D model for low-time RC pilots. You should have the experience and skills necessary to assemble and successfully fly models like the E-flite UMX Ultrix, UMX Timber X, T-28 Trojan 1.1m, Sportix 1.1m, Timber X 1.2m, or other similar class models before attempting to fly the 4-Site 3D FF PNP version. Plug-N-Play Completion Level for the E-flite 4-Site 3D FF RC Airplane Plug-N-Play Completion Level This Plug-N-Play (PNP) version comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately), plus the transmitter and battery you provide (also sold separately). Simply install the receiver, finish any final assembly, and fly! Smart Technology for the E-flite 4-Site 3D FF RC Airplane Smart Technology The 4-Site 3D FF is equipped with an exclusive Spektrum Avian Smart Lite ESC that can provide a variety of real-time power system-related telemetry data including motor RPM, current, overall battery voltage, and more with Smart and non-Smart batteries via compatible receivers (including the AR630+) and Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6 to 20, iX12 to 20 and others) while you fly. Uniquely Capable for the E-flite 4-Site 3D FF RC Airplane Uniquely Capable Like other flat foamy models, the 4-Site 3D FF is capable of slow cruising, smooth sport flying, basic aerobatics, and even aggressive 3D flying-all in the same flight! It offers a truly “mild to wild” flight experience that intermediate to experienced pilots will appreciate, whether indoors in gymnasiums or outdoors in yards, parks, sports fields, and beyond. High Performance for the E-flite 4-Site 3D FF RC Airplane High Performance The factory-installed brushless power system features a specially tuned Spektrum outrunner motor. This power system delivers plenty of thrust for unlimited vertical and 3D performance with 3S 8501000mAh batteries! Easy Assembly for the E-flite 4-Site 3D FF RC Airplane Easy Assembly Unlike other flat foamy models that are only available as kits without power and control components, the 4-Site 3D FF arrives mostly factory-assembled with the power system, servos, and receiver (BNF Basic version only) installed. All you need to do is finish some quick and easy final bolt/snap-together assembly-without the use of glue, tape, or special tools-and you’ll be ready to fly in less time than it takes to charge a battery! Durable Design for the E-flite 4-Site 3D FF RC Airplane Durable Design Three factory-installed digital servos with metal gears on all the control surfaces, plus construction with carbon fiber and composite-reinforced, high-density EPP, deliver a lightweight yet stiff and durable airframe. In the unfortunate event you damage any airframe parts or components and can’t repair them, a full line of replacement/spare parts is readily available. Spec Data Wingspan 800mm Battery type 3S 11.1V 850-1000mAh LiPo with IC2 Connector (Not Included) Motor type 2408-1200Kv Outrunner Brushless Motor 4-Pole Weight 447g Length: 917mm

• (1) E-flite 4-Site 3D FF 860mm with:
• (1) Spektrum Avian Brushless Outrunner Motor (installed)
• (1) Spektrum Avian 30-Amp Smart Lite Brushless ESC (installed)
• (3) Spektrum Sub-Micro Digital, Metal-Geared Servos (installed)
• (1) Spektrum AR630+ Receiver with AS3X+ and SAFE Select (installed) (BNF Basic version only)
• (1) Product Manual

Needed to Complete

• Full-range 4-5+ channel Spektrum DSMX/DSM2 compatible transmitter
• 3S 11.1V 850-1000mAh LiPo with IC2 Connector
• Compatible LiPo charger