Perfect for charging and maintaining 12v Car, 4wd, RV, Marine and light commercial batteries

The Power Train PTC12V12A7SL smart battery charger is designed to charge light, medium and heavy duty batteries. Idea for deep cycle batteries.

The PTC12V12A7SL charger is controlled by a sophisticated on board programming, enabling quick and safe charging as it implements a 7 stage charging algorithm, battery charger uses an on board micro-chip to control its unique pulse algorithm for the chargingcycle, this helps reduce the oxidation on the battery plates and evens the consistency of the electrolyte, minimises temperature whilst charging, and recovers the battery capacity and extends battery life.

This Automatic charger can remain connected to the battery without risk of overcharging, as the internal electronics will stop the charging when the battery is fully charged. Once the battery is fully charged, the charger monitors the battery voltage and continues to top up & to maintain the battery, keeping it fully charged and ready for use.
The PTC12V12A7SL is packaged with standard charger clips, along with an interchangeable ring terminal charging

A charger without a fan for quiet operation. Which makes it suitable for calcium, gel, AGM & lead acid batteries. A sophisticated charger system for deep cycle batteries, making them ideal for Motorhomes, Caravan, Horsetrucks, etc

Features

Heavy duty design
CE, EMC, SAA & C-Tick Approved
Selectable for GEL, Lead Acid / AGM and Calcium charging modes
Charging state LED indicators
Charges from zero volts
Fully automatic 7 stage charging system
Desulphation mode with pulses and soft start for severely discharged batteries
Charges flat batteries, and can recover the capacity of a discharged battery
Maintenance stage pulse charging increases battery life and gives increased performance
The charger can be connected and left running for months, without fear of overcharging or damaging the battery
Protection against: Reverse polarity, short circuit, overload, and high temperature
Maintenance stage pulse charging increases battery life and gives increased performance
Compact design with mounting holes for permanent fitting if required
No fan for silent operation

Output Current 12 amps

Output Voltage (Nom) 12V

Input Voltage 175-255VAC/50-60Hz

Battery Type Selectable Gel/Calcium/Lead Acid-AGM

Charge stages: 7 Stages

Desulphation High Frequency Pulse
Soft Start Slowly start the charging process
Bulk charge Maximum current until pre-set voltage reached
Absorption Constant voltage with automatic amperage control
Analysis Analyse the battery condition
Boost Higher voltage charge at limited current
Maintain/Float Pulse to maintain maximum charge

Output Voltage (Bulk) 14.3V Gel / 31.2V Cal / 14.8V LA & AGM

Output Voltage (Absorption) 14.3V Gel / 15.6V Cal / 14.8V LA & AGM

Output Voltage (Float) 13.3V Gel /13.7V Cal / 13.7V LA & AGM

Battery Range (Charge) up to 700CCA or 200A/h

Battery Range (Maintain) up to 1000CCA or 400A/h