Talaria Battery 81.4v 22s 3663Wh 45Ah Diablo Spawn

Molicel P45b

EBMX, VTB, Torp & Nucular Controllers Compatible

Satanically Powerful

High Power Long Range 3663Wh
Molicel P45b 21700 Cylindrical Cells
Tough Protective 316 Stainless Steel Case
Fully Protected 220A/550A BMS
Parallel Discharge QS8 Connectors
Free High Power Loom

Power: Extreme High (40Kw)
Range: Very High (3,663Kwh 244% Over OEM)
Height: Tall (373mm will need seat lift or aftermarket lid)

Battery Activation Required On Delivery
On delivery, please send us a request to have your battery activated.
This will also be regarded as confirmation that your battery has been received.

Talaria Battery 81.4v 22s 3663Wh 45Ah Diablo Spawn Molicel P45b 40Kw.More Volts, More RPM, More top speed. Less FW required. Less heat. More gearing to play with!

Talaria Battery 81.4v 22s 3663Wh 45Ah Diablo Spawn Molicel P45b 40Kw. This is the slightly smaller (range wise only) of the Diablo Battery. We wanted to make a slightly more cost effective battery with almost identical performance with only a small sacrifice to range, but a huge price drop of around 500 GBP. This Talaria battery is only surpassed by its father The Diablo and is a truly incredible piece of engineering.

The build list is like a dream: Molicel P45b (220 cells used). These are the very best cells second only to the illusive and more expensive p50b cells on the market. The P50b cell is under ration from Molicel. Made with pure copper sheet connections. The Hybrid BMS is an ANT 550 BMS (220A/550A). The exoskeleton case is made from stainless steel 316.

Cells

There are 220 cells in this Talaria Battery 81.4v 22s 3663Wh 45Ah Diablo Spawn Molicel P45b 40Kw. All have internal resistance. The more resistance, the more heat they produce, until they start to damage. The Molicel P45b is classed as one of the worlds premier cell for low resistance for a high power density (Ah). So with this low resistance, they are able to supply enormous amounts of power without over heating.

Power

This is a Talaria Battery 81.4v 22s 3663Wh 45Ah Diablo Spawn Molicel P45b power as limited by the 550A (peak/burst) by the Ant 550 BMS. A genuine constant power of 17.9Kw (220A non stop).

Exoskeleton / Casing

We have upgraded the casing to marine grade 316 stainless steel, so absolutely no rust issues here! Super tough and powder coated inside and out.

Connectors

For the main battery to controller connector we use the same type of plug as used by Talaria, but we use two sets to share parallel the power. This reduces heat, transfers load more efficiently and keeps the connectors from overheating.

One direct set of discharge cables goes to the controller via a high capacity QS8 connector using very large 6 AWG cables. This reduces internal resistance and heat build up. A separate second set of discharge cables using the original 8 AWG cable via a Talaria OEM plug connects to the OEM loom via the circuit breaker.

Domestic Electrics

This means all your bike accessories are still powered. Some believe that not using the circuit breaker direct to the controller removes the safety of the circuit breaker. However, all our batteries have a full working BMS. Any power shorts or irregular current and the BMS shuts down. This is much more sensitive and accurate than a mechanical breaker (you may note that the Sur Ron Ultra Bee does not use a circuit breaker and relies on the BMS alone).

Fitting

The battery uses two sets of discharge cables. One to fit the original bikes connector (for Sur Ron we supply an adapter so it can also fit a Talaria too). The second goes to an additional cable that we provide that is fixed direct to the controller. This enables the power to be fed In Parallel increasing the electrical flow, reducing resistance and reducing harmful heat. It shares the power delivery and takes the strain away from the original loom. These must be connected in a specific order (simple instructions supplied).

For those using a Torp Controller, Torp do not like direct power to the controller via your second cable. You can either not use the additional power cable we supply (we do not like to remove these as often buyers transfer batteries to another bike) or, if you are worried about your Torp warranty, you can request one of our 2 into 1 convertors in the checkout notes.Details of the adapter can be found here:/product/two-into-one-converter-qs8-supra-d6-talaria-oem-any-combination-available/

Battery Compartment Lids or Lifting Kits

Because of the extra battery height (373mm) minor modification will needed to your bike.

There are several options:

#1 Fit an aftermarket battery compartment lid found here: /product/talaria-battery-compartment-injection-moulded-battery-lid-to-fit-taller-batteries-not-3d-printed/

#2 Remove the battery plastic base tray in the bike (simply remove the 5 small allen key bolts from the top looking down) and fit our 5mm spacer between the metal battery lid catch and the lid (spacers provided)

#3 Seat Lift Kit option:https://www.electroncycles.co.uk/product/talaria-mx-seat-lift-kit-black-full-e-charged/

Specification Talaria Battery

Weight 19.2KG
Cells Molicel P45b 21700 (220).
BMS set at 550 Amps Peak. Full battery protection including over discharge (shorts) over heating etc.
Each cell with additional individual wrapping for added protection.
Additional layers of fibre board, Kapton tape, heat shrink.
Stainless steel 316 grade sealed casing/exoskeleton with internal/external powder coated to give maximum protection and insulation.
Pure copper sheet connections.
Bluetooth BMS giving individual series condition with balanced charging (We do not recommend altering our settings as may invalidate your warranty).
An integrated cord handle for lowering the battery in and out.
Charging port via an XT60 connector.
Height 375mm to top of lid not including handles

Cell Specifications

Brand: Molicel
Model: P45b
Size: 21700
Chemistry: INR
Nominal Capacity: 4500mAh
Nominal Voltage: 3.6V
Discharge: 36A Continuous per cell Max 45A
Positive: Flat/Button Top/Tabs (please select)
Rechargeable: Yes
Dimensions: 21.1mm x 70.4mm

Connecting to Bike

When connecting the battery to the bike and to avoid a spark, turn the red trip switch on the bike to off. Connect the older original power cable and then turn the red trip to on. Then connect the new power leads. Removing the battery has no special order.

Battery Charging

First time charging is VERY important. Always connect the charger to the battery with the charger powered up at the mains first. This will stop a Connection Spark. The battery needs a Balance Charge on first charge. Please charge for 12 hours first time. Always charge your battery in a safe place and never unsupervised.

Charger Not Included

Our recommended charger for this battery is: /product/charger-81v-92-4v-6a/

This Battery will not work with an original standard Talaria Controller

Bike Not Included